Burnishing Reamer

Burnishing Reamer : Changing Blade & Setting Size

1. Turn upper and lower adjusting screws one complete revolution anti-clockwise.
2. Release Clamp Turn clamping screw anti-clockwise from the top or clockwise from the bottom.
3. Using two Allen keys for opening and tightening the clamp will be easy.
4. Remove blade, clean blade slot.
5. Turn the blade over or insert new blade.
6. Press blade firmly against adjusting screws and the rear stop-pin. Tighten clamping screw.
7. For rough adjustment, turn the upper and lower adjusting screws clockwise 3/4th revolution.
8. For accurate measurements a sensitive indicating micrometer is recommended.
9. Check the upper and lower setting dimensions (back taper approx. 0.01 mm)

10. Setting fixture is recommended for quick and accurate size setting.